The LB chip is a small chip concept that will flash the LED based on the voltage applied to it. Uses only a few components and can be made easily. This repo consists all of the changes, basic components, updates and other details related to the project.
More details about the maker and this project can be found at https://www.esccrasci.in and at www.youtube.com/c/esccrasci
This chip has 5 versions:
Basic version with single LED flashing capabilities.
Can flash the LED at different frequencies based on input voltage
Small size factor only taking 10-12cms in area.
Bad timing and frquency control
Voltage vulnerabilities ( cannot handle 1 volt higher than 20 volts)
This is the second changed version with many major improvemnets but with the addition of different flaws
Can flash the LED at better frequencies which are accurate
Mild reduction in voltage consumption
Size made smaller in X and Y axis
Can work with voltages between 11-20 volts
Cannot handle high volatge and high current LED’s
Voltage change can be fatal if increased above the limit
Cannot work with SMD LED’s due to sudden changes in the voltage
Third change of the chip with structural changes.
Stronger, harder and easier to use
Better frequency control
Large size, canot fit on breadbpard without bending of legs
Bad voltage control
Excessive resistance between connection points.